can anyone make me a hook like this

[jhef]

these are the jackyll wacky worm hooks , but they are about 2 bucks each errr id like to find someone who can make me some in the 3/32 and maybe even lighter thanks

[weighinalimit]

How about something like these? I have a mold built for two different sizes and have another size coming.

[21XDC]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weighinalimit &raquo;</TD></TR><TR><TD CLASS="quote">How about something like these? I have a mold built for two different sizes and have another size coming.
</TD></TR></TABLE>

Great design idea... I might have to make that mold myself..

[PII Magnum]

Allen IM sent

[PII Magnum]

I like to find some myself

[21XDC]

I actually want one of these two hooks Owner or Gamis but the lead wont grab the strait shaft like having a bend in the hook and the weight slides. I dont want to have to paint/glue them in place.



I was gonna either make it out of the larve jig mold, tube jig, or the tapered tube TA mold as they offer a more open hook design to not hang up and have weights I like.

[jclark408]

looks like a standard steelhead jig mold w/ weedguard

http://www.do-itmolds.com/prodmolds.aspx?c=385

[21XDC]

Nah, The shake it mold would be less work to modify..

[jhef]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weighinalimit &raquo;</TD></TR><TR><TD CLASS="quote">How about something like these? I have a mold built for two different sizes and have another size coming.
</TD></TR></TABLE>
that looks great, what size hooks are you using and what weights

[weighinalimit]

right now I have 1/16 with #1 Gammys & 1/8 with 1/0 Gammys.

[weighinalimit]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jclark408 &raquo;</TD></TR><TR><TD CLASS="quote">looks like a standard steelhead jig mold w/ weedguard

http://www.do-itmolds.com/prodmolds.aspx?c=385</TD></TR></TABLE>

Sorta, except mine are like an aspirin-head, round but thin viewed on edge. The head has a shallow, flattened double cone-like profile to it, induces an additional wiggle in the bait as it sinks.

[bobbymc]

You don't have to glue the lead in place! Take 220 grit sand paper and clean the finish where the lead is going on the hook. I have done this many times and no problem with slippage.

[21XDC]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bobbymc &raquo;</TD></TR><TR><TD CLASS="quote">You don't have to glue the lead in place! Take 220 grit sand paper and clean the finish where the lead is going on the hook. I have done this many times and no problem with slippage. </TD></TR></TABLE>

I have too as I have been pouring for 20+ years.. I'm wanting a hook like above with a small bend so no sanding is nessesary..

[TRCM]

Them's a copy of the gamakatsu wacky hooks....but in black

I do like the added weed guard tho