HDS-9 Live 3 in 1 Transducers

[fishnflip]

Hey all with the upcoming sales I am looking to get 2 Lowrance HDS-9 Live units for my brand new Crestliner XF179

Want one for the console and the other for the bow.

Will I be able to get the 3 in 1 Transducer mounted on a 24v Minnkota Maxum?

If so does it come with the hardware and mounting stuff for a trolling motor mount?

If not what other transducer would be compatible with the HDS-9 Live unit that would fit on the trolling motor?


I know I could just go with a cheaper/smaller/older Graph and Transducer on the bow but I would like to go with the HDS-9 Live because it is they top Lowrance out at the moment and I plan on adding a Lowrance Ghost trolling motor in the future so going with the HDS-9 Live I would be already setup perfect for when I add the Ghost. Just want to make it work in the meantime.

[SteveS]

Quick answer is NO, it does not come with trolling motor mounting hardware. You could just get an HDI transducer and mount that on the TM with a band clamp which would give you Down and 2D sonar for now.

[gatrboy52]

You don't need a 3 n1 on t.m. the console will share ducer from transom. use front graph for mapping and A.T

[justinp61]

I think the 3-1 will be too long, although it could be mounted. I ran a LSS-1 on my Fortrex with US2. I liked having side scan up there, if my way point was off a little, I could find the bed I was looking for with side scan. I now have a ghost with AT 2 on a powered pole I made, if I'm off a little the AT 2 finds the bed.