Thread: Mega 360 issue

Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Mar 2013
    Location
    Hampstead md.
    Posts
    1,631

    Mega 360 issue

    Hello all. My mega 360 keeps getting “ out of water” message constantly throughout the day. Sometimes it turns back on pretty quickly and sometimes it takes awhile. Anyone experiencing this? Mega live has no issues. I have it connected to a Helix 15 g4n and networked to 3 other Helix units that are all g4n.

  2. Member
    Join Date
    Jan 2020
    Location
    Oklahoma
    Posts
    1,681
    #2
    Did you connect the drain wire to the negative terminal or ground?

  3. Member
    Join Date
    Jun 2004
    Location
    Baytown Texas
    Posts
    1,115
    #3
    bad connection

  4. Member
    Join Date
    Mar 2013
    Location
    Hampstead md.
    Posts
    1,631
    #4
    I’ll re check my connections. It has worked fine for over a year. I’ve noticed it the past couple of trips.

  5. Member
    Join Date
    Apr 2020
    Location
    Ontario
    Posts
    707
    #5
    Grab some dish soap and clean the wet switch, the two metal dots on top of the pod. Voltage passes from one to the other while in the water but not if they are dirty.

  6. Member
    Join Date
    Aug 2015
    Location
    Greenville, TX
    Posts
    602
    #6
    Ensure it is in the water deep enough. This was an issue I had.

  7. Member
    Join Date
    Mar 2013
    Location
    Hampstead md.
    Posts
    1,631
    #7
    Thanks everyone! Worked flawlessly on Sunday. I did wipe off the wet switches and connections were tight!��