Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Sep 2007
    Location
    Athens
    Posts
    166

    02' 250 XB not peeing enough

    I took it out yesterday and noticed that at idle, the water is just a trickle coming out the pee hole. When I give it some throttle, the water seems to come out a little more, but not as much as it use to do. What could the problem be? Thanks for any help. Sure don't want to burn that baby up!

  2. Kllr bee
    Join Date
    Jun 2004
    Location
    Centerpoint, Alabama
    Posts
    1,199
    #2

    Re: 02' 250 XB not peeing enough (coreystroke02)

    First stick a piece of wire in the hole to see if it is partially blocked. If you haven't done a water pump impeller in the last year, DO IT NOW.
    Richard

    Also, if you run your motor high check under waterpump to make sure you haven't pushed the seal out of the gearcase that seals the driveshaft. They are know to do this on high gearcases and this messes up the waterpump housing.


    Modified by kllr bee at 4:16 AM 4/27/2009

  3. Member
    Join Date
    Jan 2007
    Location
    Ft lauderdale
    Posts
    602
    #3

    Re: 02' 250 XB not peeing enough (kllr bee)

    +1

  4. Member
    Join Date
    Sep 2007
    Location
    Athens
    Posts
    166
    #4

    Re: 02' 250 XB not peeing enough (kllr bee)

    Thanks guys.

Similar Threads

  1. still not peeing
    By FlukenLizard in forum Yamaha Motors
    Replies: 10
    Last Post: 05-17-2013, 10:11 PM
  2. 200 ox66 not peeing
    By Rangerman30 in forum Yamaha Motors
    Replies: 2
    Last Post: 03-25-2012, 06:10 PM
  3. 225 efi not peeing
    By sparky480 in forum Mercury Motors
    Replies: 2
    Last Post: 03-19-2012, 01:51 PM
  4. Motor not peeing
    By rangerfreak in forum Yamaha Motors
    Replies: 6
    Last Post: 01-11-2010, 02:53 PM
  5. Motor not "peeing"
    By SUSHII in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 1
    Last Post: 07-20-2009, 03:52 AM