Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Oxford, NC
    Posts
    256

    Discovered what was causing my weak pump out on my ZXR20..

    Removed the pump and found that Skeeter had used an excessive amount of silicone sealer when assembling the pump causing almost half of the output to be blocked…

    A44608A2-4CF1-48BD-B423-81B0707D08B7.jpeg

  2. Member Rick H's Avatar
    Join Date
    Sep 2011
    Location
    Northern Cincinnati Ohio Close Enough like it or not its where I am
    Posts
    3,797
    #2
    OOP'S

    Steve McQueen "Le Mans"
    Own the Champ! Life Long Petty Fan!

    2003 ChampioN 2006 250 Merc. XB, Prop By Mark C.
    2002 Ranger Okeechobee Special EvinRude Ficht 90 / 9.9 4-Stroke GLAD to have a Get me to the Dock motor maybe!

  3. Member
    Join Date
    May 2015
    Location
    Broken Arrow, Ok
    Posts
    838
    #3
    Good find. Probably not the only one that went out the door like that.

  4. Member
    Join Date
    Jun 2004
    Location
    Indiana
    Posts
    2,014
    #4
    Yup, I’m going to guess a lot of them went out the door like that. LOL.

    Not sure I want to dig through my pumps to check on mine.

  5. Member
    Join Date
    May 2021
    Location
    Huntsville, AL
    Posts
    489
    #5
    Quote Originally Posted by Twray View Post
    Removed the pump and found that Skeeter had used an excessive amount of silicone sealer when assembling the pump causing almost half of the output to be blocked…

    A44608A2-4CF1-48BD-B423-81B0707D08B7.jpeg
    can you zoom out a little so i can see where this is?
    2023 Skeeter FXR20
    Lake Guntersville

  6. Member
    Join Date
    Apr 2012
    Location
    Oxford, NC
    Posts
    256
    #6
    Bogeypro…the pump was removed in the photo. The location of the pump is underneath the livewell.

    IMG_0182.jpeg
    Last edited by Twray; 11-03-2023 at 07:28 AM.