xpress trailer springs????

[timfish]

Hey yall-I have a 2013 Xpress H20B-years of saltwater have taken their toll--I need new springs and shackles--any idea/info on replacements yall can provide me with would be appreciated

[BigFishSteve]

Xpress has a website and trailer tab. and a phone number on the webpage under contact.

[CJ1]

I have always just measured and counted the leaf number. A spring shop or e-trailer can take it from there. Xpress has never helped me with Back crap trailers. Heck I could not get the OEM replacement lights from them. CJ

[cape cod basser]

I agree with above. Just look up trailer parts on line or at a truck parts supplier.

[ericm]

Go to a local heavy truck alignment shop and they'll custom make everything on site and the parts will be way better than the Chinese springs / shackles the boat manufacturers use. Just take one set down and they'll use it as a pattern. Most of those places have their own onsite furnace.

[21XDC]

https://www.championtrailers.com/lea...s-accessories/

https://thetrailerpartsoutlet.com/co...r-axle-springs

https://www.etrailer.com/dept-pg-Tra...t_Trailer.aspx

[Bassmeister]

https://www.championtrailers.com/lea...s-accessories/

https://thetrailerpartsoutlet.com/co...r-axle-springs

https://www.etrailer.com/dept-pg-Tra...t_Trailer.aspx

All of those can help you with almost any trailer....

[BOATS]

I have always just measured and counted the leaf number. A spring shop or e-trailer can take it from there. Xpress has never helped me with Back crap trailers. Heck I could not get the OEM replacement lights from them. CJ

I have gotten trailer parts from them but had to go through the dealer. They would not deal with me directly.

[timfish]

thank yall for the help!!!

I agree with above. Just look up trailer parts on line or at a truck parts supplier.

[mactlman]

rural king and farm and fleet also sometimes

[RoadrashPaul]

Does Xpress build their own trailers or buy them from a builder? If there is a tag on it you can call the mfg and see if they have records of what kind of axles/hubs they use. That old they may not. We ran into this with our Pathfinder. It was built in 2014 and trailer mfg (can't recall who right now) did keep electronic records back then. They helped us best they could but it was so rusty we couldn't pinpoint the exact style. Also had a hell of a time getting parts as torsion axles are made overseas and stock was extremely low last summer.

[BOATS]

Does Xpress build their own trailers or buy them from a builder? If there is a tag on it you can call the mfg and see if they have records of what kind of axles/hubs they use. That old they may not. We ran into this with our Pathfinder. It was built in 2014 and trailer mfg (can't recall who right now) did keep electronic records back then. They helped us best they could but it was so rusty we couldn't pinpoint the exact style. Also had a hell of a time getting parts as torsion axles are made overseas and stock was extremely low last summer.

They are built inhouse.

[Highcentered]

I have always just measured and counted the leaf number. A spring shop or e-trailer can take it from there. Xpress has never helped me with Back crap trailers. Heck I could not get the OEM replacement lights from them. CJ

At least they're better than Tracker trailers in most areas but that's not saying much.

[21XDC]

I owned 2 Xpress boats back in 1998 and 1999. The trailers were built by "Back Track" and they were weak/junk at best. I hope the newer ones are better.