Map problems

[n2bassn]

file:///var/mobile/Library/SMS/Attachments/db/11/E04E7096-984F-4123-B5F8-F3BA7898BDAB/IMG_0379.heic
Map will load at beginning of the day but will develop problems an hour or so into the day. Very slow loading. Have that solid gray screen a very long time. Unit is an Echomap UHD 93 sv. I have the same unit at the bow and it is networked with the one in the pic. Bow unit map works fine.

[n2bassn]

file:///var/mobile/Library/SMS/Attachments/db/11/E04E7096-984F-4123-B5F8-F3BA7898BDAB/IMG_0379.heic
Map will load at beginning of the day but will develop problems an hour or so into the day. Very slow loading. Have that solid gray screen a very long time. Unit is an Echomap UHD 93 sv. I have the same unit at the bow and it is networked with the one in the pic. Bow unit map works fine.

sorry that link doesn’t work.

[Todd Driscoll]

Are you only running built-in mapping on each unit, or do you have accessory mapping on an SD card that both units are reading?

[n2bassn]

[QUOTE=Todd Driscoll;13178906]Are you only running built-in mapping on each unit, or do you have accessory mapping on an SD card that both units are reading?[/QUOTE
Im running the built in mapping that came with the units. Forgot to mention. Both units are up to date.

[Mcjenson]

My mapping is still a little flakey in one of my 943xsv's. It's strange, works great on all the graphs but one, but even on the one most of the time it works fine.

[Todd Driscoll]

I doubt your issue is related to networking (your units do not share the built-in maps) but try disconnecting the network cable to see if the issue goes away. Also, if you have any SD cards in the units, remove those as well. Also provide what else is part of your system (other Echomaps, LiveScope, transducers, N2K devices) and verify that you are running current software on all Echomaps (the UHD is 25.00).

[n2bassn]

I doubt your issue is related to networking (your units do not share the built-in maps) but try disconnecting the network cable to see if the issue goes away. Also, if you have any SD cards in the units, remove those as well. Also provide what else is part of your system (other Echomaps, LiveScope, transducers, N2K devices) and verify that you are running current software on all Echomaps (the UHD is 25.00).

The only item I am running on the console unit is a GT 54 transducer. I have livescope that is hooked to a dedicated 106 with its own battery. There are no connections from livescope or the 106 attached to the 93sv’s. Both 93sv’s are updated 25.00. Also, no SD cards in either unit. The bow unit is using a GT 54 in the trolling motor. Bow unit mapping is fine.

[Todd Driscoll]

I sent you a PM asking for your contact info.