Just replaced it and now I'm wondering if it should come over the top or under the bottom ands to the bow hook this is mine now??? IMG_7091.JPG
Just replaced it and now I'm wondering if it should come over the top or under the bottom ands to the bow hook this is mine now??? IMG_7091.JPG
1990 374V Ranger Still kickin' bass after all these years
Just replaced mine. It's correct this is how mine looked before and after.
Scott
2023 Ranger 520R
Serial # 2B125401 - 250ProXS 4 Stroke
Mine is like that allso
Bill Perry
Zwolle, LA (Toledo Bend)
bpicinc_2000@yahoo.com
2001 ZX-250 VMAX 225. HDS-9 Carbon, HDS-9, 3D Sonar, HB 998c hd si, Active Target, MG Tour Pro 36v, 12" Slide Master
USN, USS Newport News CA-148
Under the bottom, to keep the bow from bouncing while towing down the road.
Mine is under the bottom
2009 ELITE 210
Don't think I have ever seen a setup that has the strap going over the bow roller.
2019 Phoenix 919 Pro XP
225 Mercury 4 Stroke ProXS (# 2B591262)
MinnKota Ultrex trolling motor
Lowrance HDS Carbons
Bottom............
Under the bow roller.
guess I should clarify I mean should it come off the top of the winch or the bottom of the winch ,I know it has to go under the bow roller to hold it tight????
1990 374V Ranger Still kickin' bass after all these years
Don't worry Al, you've got it right.![]()
The correct way is just like you have it.
2010 Nitro Z7
Mercury Optimax 150
Garmin 106SV(bow), 106SV(console)
Cayuta Creek Outdoors
https://www.youtube.com/channel/UCw3...UvSxaeLpzFyYHA
Mine's just like yours Al.
1990 Ranger 362V Yamaha Pro-V 150
Old Town Predator MinnKota
I reversed wound mine so the hook doesn't dig into the roller.
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
If I were run my strap off the bottom of the spool, it wouldn’t lock into place with the winch lock.
Kinda like the toilet paper argument, over or under on the roll.![]()
I say which ever way makes the fit snugger against the bow roller and prevents the bow of the boat from bouncing when trailering.
Mine is under the winch drum. I tried it the other way after reading the thread but found the hook levered against the roller rather than pulling the boat to the roller.trailer winch 4.jpg
2009 Triton Trx 20HP
250 Pro XS 1B704868
Torque Master Gen1
SeaStar 6" Hyd. Jackplate
Merc Monitor
8' Power Poles
Minn Kota 36V Ultrex 112#'s Mega Si/Di iPilot link
Helm Solix 10 G2 Si/Di + second Di transducer in Hull
Bow Solix 12 G3 + Mega360+ Mega Live Imaging Target lock