E200FPLSRB
04 200 DI
Think Im having issues with the pdp. Motor started fine all morning. 5 or so restarts while fishing then I turn the key on and let the system check do its thing like always but I notice the fuel pump runs much longer than usual. Attempt to fire it up and nothing. Let go of key and system check beeps and cycles the lights like normal except I didnt turn key to off I left it in run position anf fuel pump starts running again for a bit. I went through process again with same result and kept trying to start and every few tries the starter would engage for a split second then nothing did this for a while then it would turn over for a few seconds and quit and this kept on for about 20 attempts then would turn over for longer and longer for another 20 or so trys and try and fire a few times. Finally got her to start and it was rough for 30 seconds and smoothed out and got me back to the ramp thankfully. Every failed attempt to start the check lights ran through its check process without turning key to off like it was losing power and thats what had me thinking PDP
Im thinking maybe the cold joints in pdp showing up now. I would like to know what you folks think.
Was looking at how to remove it and it looks like Ive got to unbolt the oil pump and injector and capacitor as they are all attatched to the same bracket. Messing with the oil system makes me nervous but I think its my only option.
Thank you all for your continued help and support on this great forum
Have a great day!