Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Murrieta, Ca
    Posts
    1,419

    Reed swap 1.5L optimax

    Installing criss carson reeds,. Dry gaskets or something like hi tack?

  2. BBC SPONSOR
    Join Date
    Jun 2010
    Location
    Key Largo, FL
    Posts
    1,234
    #2
    Dry,No sealer needed,Chris

  3. Member
    Join Date
    Jun 2004
    Location
    Murrieta, Ca
    Posts
    1,419
    #3
    Awesome thanks

  4. Member
    Join Date
    Jun 2004
    Location
    Murrieta, Ca
    Posts
    1,419
    #4
    Do I have to split the lower cowl to remove the oil tank? Factory service manual says - disconnect sensor and oil line, remove 2 bolts, remove tank. Seems like not enough room to to clear intake boot.
    0T985632

  5. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    15,385
    #5
    yep show do
    .................................................. ...the scariest thing in life is the unknown ...................................

  6. Member
    Join Date
    Jun 2004
    Location
    Murrieta, Ca
    Posts
    1,419
    #6
    Took off right side lower cowl, tank came right off. Reeds looked like new, cages took some honing w 2000 grit wet dry. New CCR reeds in, intake on, waiting for the boot and clamp to arrive for behind throttle body. Original one was folded when installed and clamp.

  7. Member
    Join Date
    Jun 2004
    Location
    Murrieta, Ca
    Posts
    1,419

  8. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    15,385
    #8
    .................................................. ...the scariest thing in life is the unknown ...................................