Just installed the water Pressure sensor on my 115 and it does not display on the App. I erased the app off of my phone and re installed it. Still no pressure reading. I’m stumped at this point.
Just installed the water Pressure sensor on my 115 and it does not display on the App. I erased the app off of my phone and re installed it. Still no pressure reading. I’m stumped at this point.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s with Blue tooth for the TM. Minn Kota 345 PCL charger, Minn Kota Quest TM.
Never mind!!!!’
jeez! With the engine running touch the RPM screen and select water pressure! Amazing
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s with Blue tooth for the TM. Minn Kota 345 PCL charger, Minn Kota Quest TM.
Can you describe how the sensor is installed? I'm interested in one for my 2022 Merc 115 Pro XS
Couldn’t be easier. If you have the analog gauge you will just remove the plug with the tube connected to it. Install new sender and plug it in. Plug is already in place. If you don’t have analog plug there will just a plug that you will remove and then install the new sensor. Super easy and straight forward. Good luckOriginally Posted by Dmy-rt188p
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s with Blue tooth for the TM. Minn Kota 345 PCL charger, Minn Kota Quest TM.
Thanks ifishinxs. Did the sensor sync with your Vessel View without any further update or modification?
No other modifications required- the PCM is already monitoring the circuit for a sensor (it's just not there).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Don
I would like to keep my analog gauge is there a kit to make that happen.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s with Blue tooth for the TM. Minn Kota 345 PCL charger, Minn Kota Quest TM.
Yes, it sync’s right up.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s with Blue tooth for the TM. Minn Kota 345 PCL charger, Minn Kota Quest TM.
What is the part # for the pressure kit?
2022 1875 Lund Renegade XS
Mercury 115 ProXS
Garmin Force TM
(2) Garmin 12"
These need to be done with ONE engine (including it's serial number) per thread. This is very important as there's an earlier 115 that's a totally different engine/scenario.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
2010 Pro XS 150
SN 1B882930
This motor has two pressure sensors connected to wiring harness - only one of which is connected to the grey pressure tubing from block. Can one of these be replaced with the “digital” sensor to enable WP via Veasel View Mobil?
thanks!
Last edited by Old Kenner Fan; 08-29-2024 at 04:24 PM. Reason: Moved to new thread in 2.5 forum
Reply With Quote
