1996 johnson 200 johnson venom?
dont know serial number off the top of my head but i can get it if you need it
1996 johnson 200 johnson venom?
dont know serial number off the top of my head but i can get it if you need it
oooooooooooo... not rusty... and I might be off... but they are EXPENSIVE...........I am thinking about 250-300 or so.... maybe more.....
Just rebuild the one you have.
They sure aren't cheap. I replaced one on my old 200 Vindicator about 3yrs ago. And if I remember right ,it cost over $300.00 and I put it in myself. Mine was fried,but if yours is not rebuild it.
Starter part number 586890 @ $321.65.
As long as you did not bang on it with a ball pein hammer and that the magnets inside are OK, it should be inexpensively rebuildable. Be sure to change out the bottom plate and bushing assy. and that will be well worn if the starter is noisey.
Parts are available thru a dealer or an alternator-starter repair shop.
-----
A Technical troubleshooter possessing more tools than talent !
kinda what i thought
ill just have it rebuilt
thanks guys
Dat's they way to go Luke if ya have a reputable rebuild shop around!!
Or look on ebay.... I bought a used one for 50 bucks.... works pretty good... not new, but does the job.
there is a guy here in town that does a lot of starter and alternator rebuilds
and hes been doin it a long time so im havin it done now
thanks for the info guys
Glad We could help.
Reply With Quote
