KEITECH Little spiders Jig head

[Pokie Pa]

Getting into fishing KEITECH little spiders for smallies. Any KEITECH GURUs that use these tell me what
jig head you use??? I mainly fish the 3.0 & 3.5 spiders. I have lots of different jig heads but I am thinking
a NED jig so the spider stands up so I can hop it in the gravel and rocks where I fish. Thoughts???
Thanks

[ECobb91]

Been fishing Keitechs and cabin creek spiders for years. I only use these

https://www.tacklewarehouse.com/Keit...ge-KSFBJH.html

[willwork4fish]

I used to just use a ballhead but all I've been using the past couple of years is the Zman finesse football head. On sale right now at TW, $4.98 for a 3 pack. Probably use 3/16 the most.

[bassfly]

Try a Hayabusa Baby Shooting Ball Head. It's a great little weedless football head,

[ECobb91]

Try a Hayabusa Baby Shooting Ball Head. It's a great little weedless football head,

Those are great heads, definitely would work with the 3.5” but I found the hook to be too long for the 3.

i use those heads a lot to make my own finesse jigs and they’re probably one of the best I’ve used

[Pokie Pa]

I checked them out… I use a lot of lil spiders and mostly 3.5. What size hook #1 or 1/0???? I use a 1 for smaller spiders and a 1/0 for the 3.5. Is it about the same for those Hayabusa???

[ECobb91]

Ya I’d go with a size 1 for 3” spiders and 1/0 for 3.5”
attached is a picture for reference. The one on top is a 3” spider with a Keitech size 1 hook. These go a little past where the tails are connected. Prob could even get by with a size 2 hook.

The one on the bottom is a 3.5” spider with a Hayabusa 1/0 hook. The Hayabusa goes right to about where the tails are connected to the main body.

8B7C2C49-1B9C-4D14-8527-C92038B78A34.jpeg

[Pokie Pa]

[QUOTE=ECobb91;12943841]Ya I’d go with a size 1 for 3” spiders and 1/0 for 3.5”

Thanks. That is what I was looking for. I’ll try both sizes for my 3” & 3.5.
appreciate the info.