Guy with white boats, what are you using to clean it? I use slickmist and some stuff it doesn’t get cleaned off.
looking for recommendations
Guy with white boats, what are you using to clean it? I use slickmist and some stuff it doesn’t get cleaned off.
looking for recommendations
Semper Fi
303 and elbow grease not trying to be an a-s I have to do same on mine and it's gray
Clean it with Dawn and ammonia. Then apply Pro Tec Sealant Polish to make it easier to clean. www.protrtecproducts.com
I now use ammonia 1-2 cups per gallon to wash my boat, cars, any non-porous surface. Try it you will never go back to other products. I used to wax my cars and boat but realized it is not doing what I hoped it would do. Skip the wax. What is worthwhile is a good ceramic coating when the car or boat is new. Short of that, wash it clean, wipe the scum line off with a wet towel as you see fit, wash it with some frequency.
John Walker - Matthews NC
2021 Ranger RT198P - Mercury 150 4S
VesselView Link - Enertia Eco
MotorGuide Tour Pro - Epoch Lithiums
Lowrance Carbons - Active Target 2
Slickmist is great but it's not a cleaner. Wash with a good detergent then put a wax sealant on it.
After that I wipe my boat down every time I put it on the trailer with a towel. Any scum lines usually wipe right off. If left to dry it's takes a little more elbow grease!
Not a white boat, but my boat stays in the water for 5 months straight. When I pull it I just spray with 50/50 water and vinegar to get the scum line off.
I've used Mr. Clean and TopCoat F11. Whatever scum line I do get easily wipes off.
2015 Ranger RT188 DC; BassCat Storage Box; Mercury Optimax 115ProXS;
19" Spitfire X7; Vessel View Mobile; Minn Kota Ultrex 80; GForce Handle;
TM Eliminator; Helix 7 G2N SI Combo F/R; HydroWave KVD; BBT 4" Angled Bow Mount; Durasafe Locks for Electronics and Ultrex;
Twist Step Boarding Ladder; EZEE Step ES1; BAC RAC Rod Storage; Motor Mate Transom Saver
Isn’t 303 for fabric/vinyl?
Semper Fi
Reply With Quote
