I put that exact recessed pedal in my 06 185vs and wouldn't hesitate to do it again. It's not a tough job except near the front of the tray closest to the bow. The majority of the hole will be over your big center compartment and cutting that and installing the drain line isn't hard at all. Cutting through the front wall of the compartment and getting through the foam insulation is the hard part. That wall and deck combined are really thick and I burned up a couple blades in that area but got it, just took some time. Go slow and make sure to run a shop vac right beside your saw blade as your cutting to suck up all the fiberglass and foam, nasty stuff in particle form.