if so how is the fit does it go up tight to the bullet of the lower end or not does it do the job??? thinkning about getting one but saw one on a boat and it looked like an after thought.
if so how is the fit does it go up tight to the bullet of the lower end or not does it do the job??? thinkning about getting one but saw one on a boat and it looked like an after thought.
1990 374V Ranger Still kickin' bass after all these years
Is your skeg broke Al? If so, how much? Those things look fugly to me....JMHO I'd rather do a real fix and have it welded and reshaped.....
had one on my 200 johnny,it lasted about 2 years and split in half,i think it looked better after i took it off and just cut the skeg straight and repainted.
wouldn't waste my money again.
I'll post a pic of my skeg later when I get home from work ok running like this for about a season and 1/2 and thought I'd take care of it but may leave it alone what's the down side of not repairing or replacing????
here are a couple pics of my skeg been like this for 2 seasons now guess I'll just leave it alone [img][/img]
That's pretty excessive Al. Are you having a lot of torque in the steering? If so I'd have it cut off square and a new piece welded in and install a torque tab on it. JMHO
some torque but not too bad I may have it repaired worried about the seals after it's fixed or should it be ok as long as they don't get it too hot????
You have enough material for a skeg guard or skeg shield.
Would you recomend running one??
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ChampioNman »</td></tr><tr><td class="quote">Sure. </td></tr></table>
+1, I have run them on two different motors and they work great.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
which brand fits the best???
Here are some pictures Al . http://www.keelshield.com/products/skegshield
If you have any questions contact us anytime.
Thank you Scott for everything will post pics once I get it on...
Skeg guard on before[img][/img] and after with skeg guard[img]
[/img]
Wow...that came out really nice!!!!!
Just can't leave well enough alone!!
98 Stratos 273 w/ 150 Faststrike
Looked better than I thought it would.....
Al, the fit and installation of the SkegShield looks great !
Thanks again for buying our product , and Made in USA.
Looks good!
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
Reply With Quote
