Bought 2001 225HP Ficht need help translating Printout

[dusky203]

Hello everyone!
Heres my story...I bought a 2001 225HP Ficht. Got it for 3700 bucks plus 400 for new tach and harnesses. Compression = 128-130-130-130-130-132
Model # E225FPXSIF
Serial #4951227
Hours = 617
Max Temp = 192
Max RPM = 6242
EMM S# = 6669
EMM date code = 15EB
Diag. Version = 60003
EMM max temp = 172
Prog. version = 3030259
Looks like 45% time at 500 RPM
20% at 1000 RPM
then a mix of higher RPM
There is also a bunch of numbers under Injector values if you need these I will post them.

Most of the above info is self explanitory however some of it is over my head. ANy input from anyone here would be great!!!

Thanks
Tim

[RUSTY63]

Welcome to the BBC.

The compression numbers look good.
Model and serial numbers you understand, right?

Hours, this is run time on the motor as the EMM was replaced on 6-30-02.
Max temp is the max powerhead temperature.
Max RPM, this is the highest RPM the motor has turned, This motor should not be turned over 5800.
EMM S#, this is the serial number of the replacement EMM.
EMM date code is just that.
Diag version is just that.
EMM max temp, this is the highest temp recorded in the EMM.
Prog. version, this is which program or Map the EMM has loaded in it.

I looked at the warranty history on your motor, it was purchased by a Mr.Ross in West Palm Beach FL on 4-11-01 and the warranty expired on 4-12-03.
During its warranty period it had two claims filed, on 4-15-02 a seal was replaced and on 6-30-02 the EMM was replaced.


Hope this answers your question.

[dusky203]

Thanks Rusty,
I am new here but from what I have read you seem to be the man. Based on your experiance what are your thoughts on this motor? I have heard many good things and not many bad things. It will be pushing my Dusky203. Once again thanks a million

Tim

[RUSTY63]

Great motor with few if any problems.

Glad to help.