Why is the paint peeling from my lower unit? This is a 2020 Reata.
Thanks!
Why is the paint peeling from my lower unit? This is a 2020 Reata.
Thanks!
2020 Ranger Reata 1850MS Merc Pro XS 150
This should probably be moved to the Merc 4 Stroke forum. Whoops
2020 Ranger Reata 1850MS Merc Pro XS 150
I’m seeing more and more posts about this, how is it being addressed and what is the real cause?
2018 TRX 18. 2020 Mercury 200 Pro XS V8
I have repainted my lower unit.
-Removed the prop
-Scuffed the lower unit with with 80 grit.
-Masked off all other areas
-Wiped it down with Acetone
-Used DupiColor paint for Automotive Wheels.
Easy Pleasy and came out looking close to original.
2019 RT 198P
2018 Mercury Pro XS 150 HP 4 Stroke #2B610068
Twin 12' BT Talons
4" Atlas Jack Plate
Riptide Instinct Quest
Prep, prep, prep, then paint
Steve McQueen "Le Mans"
Own the Champ!Life Long Petty Fan!
2003 ChampioN 2006 250 Merc. XB, Prop By Mark C.
2002 Ranger Okeechobee Special EvinRude Ficht 90 / 9.9 4-Stroke GLAD to have a Get me to the Dock motor maybe!
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
It’s because Rangers run so fast that it peels paint off the LU! Don’t shoot me,I have a Ranger too.
2000 Ranger 518vx - 2019 Mercury Pro xs 200
I was gonna say, Mark- looks like speed-blasting to me.
In all seriousness- get a dealer to take a look at it.
If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info (serial number) when posting. Thanks!![]()
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
I have the same issue with my 2020 200 hp Fourstroke with less than 325 hours. I think Mercury should replace my lower unit OR at the very least repaint it to like new. Dealers don’t give a hoot about these type of issues, so taking where I purchased or to local authorized dealer is a waste of time.
Ps. my previous engine was a 2003 Yamaha HPDI/VMAX I bought new and used hard for 17 years…never had an issue at all with paint peeling off from anywhere on the engine.
This engine cost way too much for this to be happening. DEFECTIVE PAINT AND/OR POOR PAINT PROCESS at least for the batch my engine was part of
IMG_9856.jpegIMG_9855.jpeg
Last edited by Pathfinder2200v; 05-22-2023 at 07:23 PM.
(Mike Miller) My Botes:
2002 17 Maverick HPXv Kevlar/Carbon (hull #55) w/ Yamaha 90 (TLRA)
2003 22 Pathfinder (hull #336) repowered w/ 2020 Mercury 200 Fourstroke (serial# 2B788020)
Same issue on my 2020 Verado, only not as severe (yet). I only have about 6 hours on the motor.
2020 Triton 216 Fishunter
Mercury V8 300 Verado (2B646603)
If your engines are still under warranty take them back to the dealer for correction.
If you haven't already, might also want to review the Announcement at the top of the forum...
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
This is a known issue and Mercury should fix it under warranty. Take it to the dealer and complain hard enough if you have to.
If your engine is under Factory Warranty, get it back to your dealer for inspection. Poor paint adhesion is easy to identify.
Just a reminder: ONE (1) engine/poster per thread, and serial numbers are REQUIRED when posting.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
(Mike Miller) My Botes:
2002 17 Maverick HPXv Kevlar/Carbon (hull #55) w/ Yamaha 90 (TLRA)
2003 22 Pathfinder (hull #336) repowered w/ 2020 Mercury 200 Fourstroke (serial# 2B788020)
Why bother painting it? The black would match better. BTW, my 115 is similiar.
(Mike Miller) My Botes:
2002 17 Maverick HPXv Kevlar/Carbon (hull #55) w/ Yamaha 90 (TLRA)
2003 22 Pathfinder (hull #336) repowered w/ 2020 Mercury 200 Fourstroke (serial# 2B788020)
My 2020 just started to do the same. One month out of warranty and Merc said "good luck". I probably won't worry about repainting unless I go to sell it.
2020 Nitro Z20 Pro Package
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Had this same thing happen to mine 2020 250 4 stroke took it back to dealer and mercury sent a brand new lower unit that dealer installed no charge to me I was very surprised they put a new lower on mine was a very small place close to the mid section