Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Mar 2009
    Location
    georgetown
    Posts
    234

    2004 Evinrude 225ho Lower Unit Skeg

    I was runnin the river 4 weeks ago and hit a piece of drift. When I got back to the ramp, I noticed about 2 inches of the skeg was cracked. No other damage to the prop or shaft, but today that 2 inch section departed. Would like to know what would be the best sleeve to slip over this? Got to big tournaments in the next month and need a quick fix until the season is over and I can get a new one put on. Thanks for any replies.

  2. Forensicator Javelin389's Avatar
    Join Date
    Jul 2004
    Location
    Lebanon, TN
    Posts
    13,638
    #2

    Re: 2004 Evinrude 225ho Lower Unit Skeg (beaveflipper)

    A good dealer can fix that in about 2 hours, with paint
    '05 Stratos 200 ProXL, '05 Evinrude 225HO

  3. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,579
    #3

    Re: 2004 Evinrude 225ho Lower Unit Skeg (beaveflipper)

    A Skeggard would do the job for you, usually run about $100.00.
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

Similar Threads

  1. skeg fin on lower unit?
    By bigjay in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 07-19-2010, 04:44 AM
  2. 2004 225ho Lower Unit Problem
    By beaveflipper in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 10-12-2009, 09:22 AM
  3. Evinrude 225HO Lower unit Gears trashed...
    By KCLOST in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 08-25-2009, 09:57 AM
  4. Blown lower Unit 2004 Evinrude 225 HO
    By Cull 5 in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 05-26-2009, 05:27 PM
  5. 2004 yamaha lower unit and skeg paint
    By leeman197628 in forum Champion Boats
    Replies: 5
    Last Post: 02-26-2009, 10:10 AM