I'm trying to "make" a replacement tool that I need to do some reel repair/maintenance, and I have to drill a small hole in some stainless steel jaws of a pair of needle-nose pliers. My Carbide drill bits aren't doing the trick. Anyone know of a drill bit / have one possibly / can tell me where to get one that will drill through this stuff??? I need one about 5/64".
Thanks in advance,
All the best,
Glenn
Either that... or do you happen to have access to a machine shop that can do this for me? One hole - that's all I need to have drilled in these pliers in order for them to do what I need them to do (remove pins).
All the best,
Glenn
Send them to me Glenn.
My neighbor has a machine shop in Elizabeth City. If you want his number I can forward that to you. That's the best I can do.
Men and fish are alike. They both get into trouble when they open their mouths. ~Author Unknown
Glenn, I'll check with one of the machinists at work tomorrow.
Thanks everyone. I appreciate the offers.
Billy - since you're the closest, that would probably work best for me. Thank you again for checking with them tomorrow.
All the best,
Glenn
Bingle,
Thanks for the offer. I'm going to get Bill to check locally, since he is right up the street from me, but if not, I'll send them to you. Can I get some contact info to ship to, just in case?
Thanks!
All the best,
Glenn
Thanks for the offer RedShad. I'm going to see what I can get done locally first, and then take it from there. Thanks for the offer. I appreciate it.
All the best,
Glenn
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BMC TR-20PD-X »</TD></TR><TR><TD CLASS="quote">Bingle,
Can I get some contact info to ship to, just in case?
</TD></TR></TABLE>
IM sent Glenn.
Reply With Quote