Quote Originally Posted by Jav400SDC View Post
Been having an issue with my BT Talons. When I first turn them on they work perfect. If I use them every 45min or so they also work good. If I dont use them for maybe an hour or longer, its like they just go to sleep or turn off..they will not respond to the remote. I can walk to the back of the boat and push the down button and most of the time they will deploy, other time I have to turn the switch off and back on again...and the cycle repeats itself. I have them ran into a off/on switch before they attach to the main battery. I have changed remotes to no avail, new batteries etc...I have even cleared/reset them...any ideas?
I had to go back a read what you said. For some reason your Talons are loosing power. Cycling power will turn them back on. You have a power issue. Switch, breaker , or connection. If it were one then I would say it is that Talon, but it is both. So you need to check your power to the talons. Also check the individual fuses to the Talons. They some times loose connection. Also as a temporary check go directly to the batteries. Try that way. I recently heard of an issue with a boat that would loose power. It ended up being a Pico switch connection. do you have one for Jump starting?
If you have quick disconnect plug make sure you have good connection. Dielectric grease will help. Petrox on your battery connections will also help.