Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Sep 2007
    Location
    Rogers, mn
    Posts
    245

    2011 etec rough running

    2011 evinrude etec, 150hp
    Model# E150DPXAAA
    Serial # 5351387

    Just bought a used boat. First time out its running rough at idle, mid speed and full throttle. Alarm went of while driving it and this is all new to me.

    Under investigation i found this tube cracked 90% of the way through and now just from examining it, it completely broke.

    What is this tube for? Goes to oil resevoir and engine.

    Could this be the reason for the rough running?
    Attached Images Attached Images

  2. Member
    Join Date
    Aug 2013
    Location
    Australia
    Posts
    87
    #2
    The tube is for the speedo. The cable is for low oil alarm. Repair both. Neither of these faults cause your poor running. Your motor was made in 2012. Model AA. Any service history and engine report available? Fresh fuel? Compression?

  3. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,574
    #3
    You said the alarm went off so you need the diagnostic software hooked up and retrieve the trouble code.
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

  4. Banned
    Join Date
    Aug 2011
    Location
    Erie
    Posts
    3,321
    #4
    Funny that my speedo tube also just broke recently and that's why I recognized it immediately.

    Simple and easy fix. Cut off that plastic connection from the both sides of that black tube. Find something that will fit into the speedo tube. I found a old spray bottle tube fit in with a small amount of grease and lots of force. Zip tie it to better secure it but I really doubt mine will ever just come apart.

    Good Luck in finding your running problem.