Results 1 to 4 of 4
  1. 07-09-2020, 09:57 PM #1
    ckempo
    ckempo is offline
    Member
    Join Date
    Apr 2012
    Location
    Milwaukee, WI
    Posts
    354

    1995 Statos 284 accessories switches

    1995 284 accessories switches
    I have had the boat about 5 years now and still cant figure out these switches. Today I finally gotunder the helm and traced the wires up to the bow. However everything at the bow is connected to other switches. Could.the wires just be hanging up there with nothing attached?

    Also I pulled the switch panel at the helm and couldn't get any volt reading at the accessory switches. Bilge and live well, yes!
    Reply With Quote Reply With Quote
  2. billnorman1
    billnorman1 is offline
    Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    37,429
    #2 07-10-2020, 05:33 AM
    Try turning the master switch on, and the switch on the helm panel on the dash to "fish" Then turn the "accessory" switches to on. Then go to the bow and select which livewell you want to fill.
    Some or none of your switches may not match these, but in my 1998 that is what works.
    Reply With Quote Reply With Quote
  3. ckempo
    ckempo is offline
    Member
    Join Date
    Apr 2012
    Location
    Milwaukee, WI
    Posts
    354
    #3 07-10-2020, 06:43 AM
    My live wells and bilge work as they should, I have to switches that are labeled accessory but I cant figure if anything is tied to them. That is my dilemma.
    Reply With Quote Reply With Quote
  4. billnorman1
    billnorman1 is offline
    Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    37,429
    #4 07-10-2020, 09:07 AM
    The accessory switches enable the bow switches to turn on the livewell fill pumps on mine.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »