Results 1 to 11 of 11
  1. #1

    etec 300 vs 250HO

    Other than the gear case, is the difference just the mapping?

    or how close (in HP) is the 250 HO to the 300?

    Thanks
    2017 Z520 - 250 HO
    2015 Z520 - 250 HO G2
    2013 Z520 C Carbon 250 HO
    2012 Z521 250 HO
    2011 Z188 150 HO

  2. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #2

    Re: etec 300 vs 250HO (boat_less)

    The 250HO is a 3-star ultra low emission engine, the 300 is 2-star - they are not identical. For 2011 the 250HO and 300 will have the same M2 gearcase.
    -----


    A Technical troubleshooter possessing more tools than talent !

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,116
    #3

    Re: etec 300 vs 250HO (SEAHORSE)

    250HO factory tuned for High performance .

  4. Member
    Join Date
    Oct 2004
    Location
    Beaver Dam, WI
    Posts
    388
    #4

    Re: etec 300 vs 250HO (ChampioNman)

    If money does not matter get the 300. You can reduce the oil consumption if you want and set it to the XD-100 setting. THe 250HO cannot be reduced. We ran a 300 for 120 hours in 2009 and it was a fantastic, high torque engine. Only available in white though.

  5. #5

    Re: etec 300 vs 250HO (ezellmer)

    thanks to all....... I just wish I knew what the HP was (output) on the 250HO vs 300.
    2017 Z520 - 250 HO
    2015 Z520 - 250 HO G2
    2013 Z520 C Carbon 250 HO
    2012 Z521 250 HO
    2011 Z188 150 HO

  6. Member
    Join Date
    Mar 2008
    Location
    Columbia, SC
    Posts
    1,070
    #6

    Re: etec 300 vs 250HO (boat_less)

    prolly 275 ish give or take. usually the ho adds about 10 percent on top of rating because not all motors are teh same....

  7. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,116
    #7

    Re: etec 300 vs 250HO (boat_less)

    Add about 15% to the 250.

  8. Member
    Join Date
    Aug 2004
    Location
    curitiba
    Posts
    232
    #8

    Re: etec 300 vs 250HO (boat_less)

    seahorse, I have a 250 ho 2010 with the lighting gearcase. Will the new gearcase
    in the 250 ho have that round profile as the conventional LU ? Can I use that new
    gearcase at the same height as the older one?

  9. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #9

    Re: etec 300 vs 250HO (quest290)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by quest290 &raquo;</td></tr><tr><td class="quote">. Will the new gearcase
    in the 250 ho have that round profile as the conventional LU ? Can I use that new
    gearcase at the same height as the older one?</td></tr></table>

    It's not a new gearcase, just new to the HO series. It's the M2 case used for years on the offshore series of motors. It has holes in the bullet for water pickup as well as the plastic screens on the side. It will be trial and error on the height.
    -----


    A Technical troubleshooter possessing more tools than talent !

  10. Wolf Hunter bigbass225's Avatar
    Join Date
    May 2005
    Location
    Menomonie WI
    Posts
    2,423
    #10

    Re: etec 300 vs 250HO (SEAHORSE)

    250HO = 294 HP 300Etec Not sure but I would bet its not much more then 300!

  11. Member
    Join Date
    Aug 2004
    Location
    curitiba
    Posts
    232
    #11

    Re: etec 300 vs 250HO (boat_less)

    Since that now the only difference will be the power, it didn't worth a while buying the 250 except for the color ( the 300 comes just in white). I always bought the ho line mainly because the noseconed lu ( have had 6 since the rude ram) but i'm certain the " round" gearcase will drop the performance in higher speeds.

Similar Threads

  1. 21xd etec 250ho?
    By thebulletman in forum Bass Boat Setups
    Replies: 11
    Last Post: 03-05-2012, 08:17 PM
  2. Jackplate question ... '05 201ProXL w/ ETEC 250HO
    By 5littleones in forum Stratos/Javelin Boats
    Replies: 7
    Last Post: 09-01-2011, 03:17 PM
  3. Prop for a '05 201ProXL w/ ETEC 250HO
    By 5littleones in forum Stratos/Javelin Boats
    Replies: 11
    Last Post: 06-17-2011, 06:15 PM
  4. Etec 250HO smoking at start
    By Kromer in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 08-13-2009, 11:09 AM
  5. Is this option available on the new ETEC 250HO???
    By Champ203 in forum Evinrude/Johnson Motors
    Replies: 23
    Last Post: 01-25-2008, 02:26 PM