How difficult is it to replace the starter on my 96 evinrude 150hp??? I'm no mechanic.......
How difficult is it to replace the starter on my 96 evinrude 150hp??? I'm no mechanic.......
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by mknight »</td></tr><tr><td class="quote">How difficult is it to replace the starter on my 96 evinrude 150hp??? I'm no mechanic.......</td></tr></table>
Not difficult at all. Make sure you disconnect the battery cables before you start. I recommend that you always disconnect the ground cable first then the positive cable. Now you can safely remove your starter and repair it yourself or take it to an automotive starter / alternator repair shop, as I recently done for my motor.
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
remove port side cover for access. There is just enough room to pull the starter motor and shaft gear out of the engine block casting. Note how the solenoid is attached to it and where the wires go to facilitate installation.
-----
A Technical troubleshooter possessing more tools than talent !
Very Easy on a scale of 1-10 its about a 3 - PS replace the retaining clip for the gear to the starter and purchase a fewin case you fubar one. Whole project from start to finish 10- 15 minutes.
Reply With Quote
