2002 BRP Ficht 250hp...Pulled all my plugs to clean and regap. The #6 plug looked lighter on one side and and not nearly as dark/dirty as all the other plugs. Is this a sign of a lean condition or a problem or nothing to worry about?
2002 BRP Ficht 250hp...Pulled all my plugs to clean and regap. The #6 plug looked lighter on one side and and not nearly as dark/dirty as all the other plugs. Is this a sign of a lean condition or a problem or nothing to worry about?
What was its gap and what were the other's gaps?
have you talked to bob lately champ?
thanks for the response
they were all around 55-60 on the gap. I didn't pay real close attention though . I already cleaned and closed the gaps on all plugs
IF the gaps were .055-.060", then the plugs are shot. Replace them. Even though you closed the wide gaps, the center electrodes are shorter and the ends are rounded instead of being squared off.
-----
A Technical troubleshooter possessing more tools than talent !
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by juanjuice »</td></tr><tr><td class="quote">have you talked to bob lately champ?</td></tr></table>
Nope.
Reply With Quote
