Some parts are coming in;
Some parts are coming in;
Some more hardware from Livorsi Marine came in:
Here is episode 9 of Project Activator, we look at the floor and the tank is installed. Last week we posted some pictures of new Livorsi gauges, but we changed our mind on the size and color, so we talk about that too.
And, we disclose the color we are painting it, plus a hint as to what engine we got. See if you can guess.
Some more pictures and details here: https://www.wavetowave.com/home/2018...r-installation
Here's an example of the gauges we originally got, can you see the white ring between the dial and the rim? It kind of changed the look for me. The new oversize ones will look better.
Sounds like a g2 is the motor
Good guess!Originally Posted by kry29
The floor is getting glassed in.
New gauges arrived, I think these will look way better. Boat is going to be silver. The wind fairing and center of deck might be black.
Floor
Wind deflectors from Finney's
Angled and curved
Episode 10 is up. We talk about the floor, turn the boat over to blueprint the hull. Plus we talk about the engine choice.
More details in the write up:
https://www.wavetowave.com/home/2018...l-blueprinting
.
Ya, me too! Can't wait to get on the water. These projects always take longer than expected!!
Sorry for the major delay. I have an article updating the project. I got really busy, and everything got put on hold for a while, but now a bunch of progress has been made.
Hull is repaired and primed with Awlgrip epoxy primer
Article
https://www.wavetowave.com/home/2018...ing-and-update
If I am reading this latest correctly you have not yet run the G2 HO. Well let me tell you that, if propped reasonably correct for your first runs and PTP is nominally 3.25" or slightly higher, put your best Ghost Rider Ray Bans on and "buzz the tower". You will understand what fighter jocks feel when they punch it.
Been bad at updating this project here. But, we have made serious progress. Here's both episode 13, and 14 in the next post.
Here's episode 14, we have the boat primed, ready to paint. And we show finished splash well filled, plus the new rub rail we are going with.
We have paint on the boat now. Color is Porsche GT silver metallic. Not finished yet, but getting there.
22 Activator painted 1
Boat looks ANGRY ! Actually it looks pissed off. Can’t wait to see an outboard hanging off the transom.
Reply With Quote
