Xi5 won't turn off when stowed problem

[mrchampion517]

I had a problem with the motor not turning off when stowed. I searched forms and seen there is a magnetic sensor that could be out of place. I called Motorguide and they sent pictures of what it looked like and I thought I would post them in case someone else had the same problem. The sensor is that little cylinder thing on the back of the control board in the last picture.

image001.gifimage002.gifimage003.gifimage004.gifimage005.gif

[Bradrodfish]

That sensor is a reed switch that is activated by a magnet on the steer module. That is my under standing from Motor guide dealer support. Most of the failures are with the reed switch for which there is a kit to replace that switch. If this is warranty I recommend you bring to repair shop.