The VVM can Not tell if maintenance was performed.
The VVM can Not tell if maintenance was performed.
This is normally done as a PCM Service Interval reset by the servicing dealer (on the Computer Diagnostic System).Originally Posted by skooter68
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
I just called my local dealer about a 6 beep alarm I have going on and he mentioned this product so I can at least know if its something major or just minor. I didnt know about this product... is it worth it? I have a 17 250xs if it matters.
If you’re a tight wad (like me), sure it’s worth it. If you want something really useful then get the real deal.
I'm married!
That should answer that lol
I bought it a month or so ago. Its worked well so far. I dont plan to use it for anything other then fault reader but it does have some other items that can be used software wise.
2018 Phoenix 819 / 2018 Mercury 200 Pro XS
That's good to know, this kind of stuff should come with the motors... 15+k motor that beeps and cant even find out what's wrong unless you take it to a dealer
Too many different installation types to "cookie-cutter" a single instrument choice. Fault lies with whomever built boat (or rigged engine) more than likely.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
What I am seeing is that this would not work with a hummingbird with Bluetooth capabilities. This is already on my boat so I am wondering would it be more advantageous to buy the nmea2000 conversion module or go this route. I rarely take my phone out of my glove box but it would be handy in case of any alarms. I always imagined that it would be nice to have the gages on my helix g2n display though. I have a 2004 optimax 225. Has anyone linked the motor to hummingbird? What did you need and how did it work?
Why not just buy and install the Mercmonitor gauge in the dash....get rid of the current tach, or speedometer?
Since those devices and/or connectivity to your Humminbird don't relate at all to the post topic, it would be a good idea to have a separate thread. Or, as a better option, see Rhonda's post (pinned at the top of the forum) and drop her an email for information on the systems/options available to you.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Fellows- if you would, please open your own SEPARATE thread for your engine, be sure to provide the Serial Number. Location is different between the 2-stroke (Optimax) and 4-stroke V8's.
4-stroke V-8's: Terminating resistor is located in the BACK, under the cover.
Optimax/DFI, Terminating Resistor is located on the PCM,
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
I know the vessel view mobile can monitor fuel usage but say I fill up the boat can I set it up and monitor fuel usage at anytime I reconnect the app? Or does it have to be always connected when engine is running to track gallons used? I just want something more accurate than the standard fuel gauge.
Nitro z21
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
So Vessel View Mobile will give me all the information straight out of the box. No other sensors are required? Thanks
No other "sensors"
Great! Thanks
No other sensors are REQUIRED for Basic Functionality. There ARE Optional sensors/harnesses for some features to work.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Could you explain Basic Functionality? Will I be able to monitor fuel usage? Or do I need an additional sensor for this? Thanks
Last edited by jmt870; 02-25-2019 at 05:43 PM.
Fuel usage is a PCM data parameter. That's available.
Fuel LEVEL requires a harness to integrate your fuel sending unit with Smartcraft.
Data varies from one engine model to another, so this would be a separate post, with your engine serial number question.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
