I just removed two hds12 units off my 16' 921 Phoenix. I installed a 7610 and a 7612 up front mounted on a precision sonar bracket and a 7612 on a precision sonar bracket at the dash. I'm running dedicated panoptix on the front 7610 with a ps21. I installed a gt52 for the front trolling motor and console unit. Also installed an in hull transducer connected to the 7612 console unit for running on pad. I also have designated gps pucks for each unit. Everything is connected on a nema 2000 kit and I'm having a lot of issues. I literally need someone to go on the water with me to get this set up right. Is there anyone in the Dfw area that specializes in these units? Thanks

Some issues- not knocking because it's probably the user
can not get unit to read in hull transducer so no bottom reading on pad
front graph is not loading maps
the graphs constantly go dark with the auto setting even after I adjust it
the graphs are linked together but when I change setting it's doing it to all -that's good and bad
panoptix isnt reading good if I adjust range past 18 ft. Sure it's a setting
side imaging is not sharp. Can hardly see a brush pile
dont know if the units are pulling the gps info from the correct puck
doedmt seem to safe my setting when I unplug units after fishing
bottom line is I need to have an expert set these up to my liking and save the settings.