I have a new 08 SX190 with a 09 150vmax with less than 25 hours. After a couple months sitting in my garage for winter, I got a chance to take it out the other day. When I trim the motor all the way down, the trim gauge will stop at the 1/4 mark on the gauge. The motor appears to trim all the way down and everything ran fine. The gauge has always worked fine before. Anyone know what could be causing the gauge to stop at the 1/4 position instead of going all the way down as it did when I got it. I thought iy could be from sitting for a couple of months.

Thanks
Thomas