I know this is the wrong forum but I wanted the most input .

I've owned the boat for 5 years and recently had major hull failure so I took it to BPS were I bought the boat and was told by the manager" they do not do warranty" so I decided to fix it my self because TMG has not stood behind their product in the time I have owned this boat,

I tore the floor up and found all the interior welds had cracked and caused the hull to split in a few places , after a lengthy long distance phone conversion with TMG I pack up and drive 3 hours to London Ont were they do warranty.

after about 5 months of them having it and no contact from anybody I get a call telling me its done and ready to be picked up .

I initially asked to have the welds fixed along with a dent (when the TM fell of a hour after I bought the boat ) be repaired I also mentioned that the manufacture swept debris under the dry storage and it was rusting into my carpet (see pic) , the only repair that was done was the welds .

Now is it unreasonable to ask to have this repaired ? Its not like I can lift the dry box up its built into the boat and a fair bit to get at . Tracker claims its my responsibility to keep the boat clean . Do they expect me to disassemble a brand new boat in the parking lot and make sure its clean ? do they expect me to walk around the boat with a torque wrench before I leave the show room ?

a little history TM fell off first hour smashing the gunnel
big motor prop came loose after about a week
big motor came loose after a couple of weeks
fish finder bracket was installed wrong and crushed the wires shorting them out