hey everyone,
i unhooked my VRO at the frist of last year. i was just wondering if i should remove it all in full and install a fuel pump. if so how do i install one and where do i get one at or should i just use the fuel pump thats on th VRO.
thanks for the info and help
As long as the fuel side is working, just make sure that the oil inlet is capped off so it doesn't suck air and cause damage to the internals. Disconnect the 4 wire harness from the oil side. Make sure you mix at 50:1 ratio. If you decide to replace it with a new VRO they (BRP) has recently had a price increase in their parts so have some nitro glycerin handy.
should i hook the oil side back up or leave it unhooked
it seams to run ruogh since the vro was unhooked. i checked all the pluse that was put in the hoses all seam to be still tight .
That is totally up to you. If you choose to do it, mark your Oil tank at your current level. Mix TCW=3 oil to the gas at 50:1 ratio, connect the oil inlet line to the pump and with someone pumping the bulb attach the hose to the inlet fitting. Attach a ratchet clamp and keep pumping. Monitor the oil drop in the tank. If it drops they you should be good to go.
would unhooking the oiler make it run rougher
Reply With Quote