i've developed a check engine light on my e-tec, checked wire,oil and fuel connections. does anyone know if there is diagnostic software i could bye to hook up with so i can troubleshoot this with?
i've developed a check engine light on my e-tec, checked wire,oil and fuel connections. does anyone know if there is diagnostic software i could bye to hook up with so i can troubleshoot this with?
See any authorized dealer for the software and the interface cable.
Replace the on engine fuel filter, #502906, as any water in the bottom will also trigger the CHECK ENGINE light
-----
A Technical troubleshooter possessing more tools than talent !
i have checked with my dealer and they have said it is a dealer only use software. so does anyone have a link that i can pursue this interface cable and software? i have changed the fuel filter and verified the l.e.d.s on the emm and all test were fine according to the owners manual. it will be up to 3 weks beforwe the dealer can see my boat. i have tourneys coming up and need some help!
i almost forgot. the model # is e225dhxso and the serial is 05113471. i run a 14 1/2 x 19 prop.
Information on making a cable to connect to the EMM port on an E-TEC using an RS-232 serial data connection is given in an article I wrote:
E-TEC: EMM to Serial RS-232 Cable
http://continuouswave.com/ubb/....html
Reply With Quote