Anyone have any experience running a Fury Prop on a ETEC 225?
Boat is a 2006 Ranger Z19 with 225 ETEC.
Anyone have any experience running a Fury Prop on a ETEC 225?
Boat is a 2006 Ranger Z19 with 225 ETEC.
WOW! Impressive hole shot on that boat.....Imagine what it would do for a ChampioN that runs on a 24 Raker now.
WT \"Bon Temp Roulez\"
the boat is running a 26p raker now, any suggestions?
What numbers do you have with the Raker?
If I am not wrong, the Fury comes in 24, 25 and 26". You could always try a 26", but I think you would have preferred a 27". If you are able to borrow one, try it, but I would not buy one without the possibility to hand it back. If you could get a 27" it would be a different ball game...
27" Fury are out now.
http://www.bbcboards.net...chase
[]
Javelin Renegade 20 DC
Johnson 225 H.O.
27's are out but the furys run real stiff compared to the others. I run a 27 tempest 6000 rpms and a 26 fury at 5950. The fury is more efficient and a little faster on my setup. about 1 mph difference. Holeshot is still being worked on for mine. i have the pvs plugs completly out and have now drilled a 3/8 hole near each pvs hole. its decent but not good as i want. It bites really hard i can only turn up 2900-3000 rpms on take off. I have made some gains with the other hole. i am going 5/8 this week. if too much i will start plugging pvs holes back up. I get 82.7 with a 26 fury at 5950. I get about 81.5 -82 with the tempest.
Anybody have any thoughts on what pitch Fury would be best on 2005 Ranger Z20 ETEC 225 HO?
Best conditions running 71 GPS @ 5650 on a 26" Raker II tuned by Mark.
Got a cracked blade and looking at Fury. What hub kit will I need?
Reply With Quote