Cover for removed HB 323 in console????

[reelman]

I will remove the factory Hbird 323 in the right console area of my ZX170...
was told Skeeter has sort of "filler" boards for these situations...others may also...
approx 6 by 6 inches...

Please post link ASAP...or send to reelman1946@att.net

Thanx

[Alan S]

Check with Mark Miller (MM here) at Polyfab. He can probably hook you up.

[reelman]

Thanx...I e mailed the dealer...he may have a spare...see today how that goes...then tiny'sfiberglass was suggested then Plan C...PolyFab

[jigginjeff]

Why are you getting rid of it reelman?

[Alan S]

Here's another guy from the boards that does custom dash plates.

http://www.bbcboards.net/zerothread?id=643396

[fishin couillon]

Buy some of that marine starboard (PE material) and make your own cover. I bought a small sheet from BPS in denham springs to do a few things with my boat.

[reelman]

I had 2 upgrade Hbirds put on and the dealer just left the two stock Hb 323 units on the rig...I gave one away for moving the 570 into its place which frees up valuable deck space, have the console one left...who needs 4 fish finders? 3 left...

[jigginjeff]

If you go with Side imaging at the steering wheel, I would leave the other in the dash for running. I did and I use it alot. I leave the side imager on maps and use the dash for depth.

[reelman]

Both 323s are gone now...put a white plastic dash plate in the console for the time being...may put a trim gauge or something in there...if I get any ideas or see some posted...5.5 by 5.5 inches roughly...