I just picked up my new Champ 198 with a 225 HPDI. I want to run it on the muffs for a few minutes and I see it has the low water pickups.........are all HPDI's setup this way. Can you put muffs on it and run it or not?
Thanks, Bob
I just picked up my new Champ 198 with a 225 HPDI. I want to run it on the muffs for a few minutes and I see it has the low water pickups.........are all HPDI's setup this way. Can you put muffs on it and run it or not?
Thanks, Bob
2019 Ranger Z520C DC / 250 Pro XS 4 Stroke
I run mine with the flush hose on the passenger side of the lower cowling.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 21XDC »</TD></TR><TR><TD CLASS="quote">I run mine with the flush hose on the passenger side of the lower cowling. </TD></TR></TABLE>
Does water go through the pump and into the powerhead this way or not? I thought it said in the manual not to do that. I don't know....this is my first Yamaha and just want to make sure I do it right...
2019 Ranger Z520C DC / 250 Pro XS 4 Stroke
I have read both yes and no... But I have been doing it for years w/o any trouble. No buzzers or alarms go off either. I have a temp gauge and it never gets hot.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 21XDC »</TD></TR><TR><TD CLASS="quote">I have read both yes and no... But I have been doing it for years w/o any trouble. No buzzers or alarms go off either. I have a temp gauge and it never gets hot. </TD></TR></TABLE>
I've read the same as well...some say yes, some say no. The dealership that I bought my boat did this exact thing for me during a walk-through of the boat.
The only way I have found to keep the muffs on the low water pickup is with duct tape.I use the flush hose without any problems.My dealer said just don't rev.it over 1500.
Pro Staff / Indian Creek Lure Co.
RMR Industries/ BTS and KVD Line and Lure Conditioner
Skeeter21 i / Yamaha 250 HPDI VMAX
They ran it thru the flush connection when walking me thru the boat as C&O this weekend, with Todd standing right there. I'm pretty confident that'll work!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by billybass »</TD></TR><TR><TD CLASS="quote">They ran it thru the flush connection when walking me thru the boat as C&O this weekend, with Todd standing right there. I'm pretty confident that'll work!
Thats good enough for me too
2019 Ranger Z520C DC / 250 Pro XS 4 Stroke
Yamaha does make an attatchment just for the HPDI motors that work well.
721 PRO XP
250 PRO XS
Atlas Hyd Plate
srcew the muffs!
Get that puppy out on the lake!!!
Like the way you think OhioChamp!!!!!!!!!!!!!!!!!!
Pro Staff / Indian Creek Lure Co.
RMR Industries/ BTS and KVD Line and Lure Conditioner
Skeeter21 i / Yamaha 250 HPDI VMAX
Jeff Shepherd
2005 Chevy Silverado 4X4 Quadrasteer
2003 Skeeter TZX 190
2003 Yamaha 175 HPDI
No prob, unhook the engine hose on the passenger side and attach to water hose...first.
Its best to do this about 7am on a Sunday so your neighbors get the full effect...
my old 115 Yammy carb could really drown out any noisy dogs...if you like revenge...its all good.
2018 Z19/200 Optimax 2 stroker 24x3 Fury Ultrex 112
Lowrance HDS 12/9 Lives with AT 2
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reelman »</TD></TR><TR><TD CLASS="quote">Its best to do this about 7am on a Sunday so your neighbors get the full effect... my old 115 Yammy carb could really drown out any noisy dogs...if you like revenge...its all good.</TD></TR></TABLE>
I must be too nice i wait till at least 9am...
Current: 2006 ~ 20i ~ 250 HPDI ~ T1-25p
Previous: 2005 ~ ZX 225 ~ 250 HPDI Phase III - TXP 26p
Reply With Quote
.jpg)