Took my prop off to inspect shaft for fishing line. Wasn't expecting there to be three washers. Is there any order to which these should go back on? Just wanted to make sure I had it right. 225 Pro XS with Tempest Plus. Thanks.
Took my prop off to inspect shaft for fishing line. Wasn't expecting there to be three washers. Is there any order to which these should go back on? Just wanted to make sure I had it right. 225 Pro XS with Tempest Plus. Thanks.
Once the hub and prop are on the shaft, stack washers in the following order:
-Thickest washer FIRST
-Thinnest, "Bellville" (spring/washer)
-Medium thickness washer LAST.
Torque nut to 55 ft. lbs.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
always wanted to make sure I did this right. Good reading here. I even cut out the little picture of prop installing from my new fury prop box to save. I found it pretty helpful cause it is not like I change props everyday.
2018 Phoenix 920 Pro XP
Reply With Quote
