98 ranger 518 DVS Special ,, info pls

[Sharp hook]

I'm running a 2005 175 Johnson/carb, turning a 24P raker, no jack plate, prop shaft 3.5 below the pad. great hole shot and will run WOT 5400rpm, 60.5mph (gps) both tanks half, full livewell, all gear and me... runs about 56.5-57.5 with a co-angler.

Should I expect more? would a Jack plate make signifcant difference? Props??? or am I good,,,

thanks for any help

[Tom Rollins]

6" plate will give you more lift and about 2-3 MPH. Set motor 3 1/4 below pad.