Ok Dick Nite guys i need your help

[shaggy1081]

i want to spray this i havent found a fool proof method yet please save me the trouble and tell me all your secrets Thanks in advance

[mercury97]

I tried to shoot it but, it looked like cobwebs coming out of the gun I just think the dip method is the most simple.......plus it lets the clear drain straight off the end of the bait.

[shaggy1081]

i agree the dipping method seems easier i can shoot the stuff using acetone to thin it and it shoots ok its just a headache it seems thining it surely their has to be a better process i got a small bottle and i cant get the whole bait at one time but i would like to be able to spray

thanks for the info

[BassinBlazer]

Hey Shaggy,
If you don't mind my asking, where did you buy the Dick Nite's clear. I've been wanting to try some myself.

Thanks,

[b75nweav]

What are you spraying it with? I used to spray it all the time with no problem. Only thing I hate is cleaing the gun after using it. I used to use an old airbrush but switched to a mini touch up gun. (Harbor Freight). The trick is to thin with laquer thinner before you spray. Doesn't take much, just pour a little DN in a cup, then add drop's of laquer thinner and stir until it's about the consistancy of skim milk. Shouldn't have anymore problems after that... Good luck.

[shaggy1081]

i got mine from the tackle underground link he will give you alot better deal he sent me a 4oz sample for shipping cost

im using a harbor freight brush to spray the clear on im gonna try to play around with it a little bit more tomorrow i got a little aggrivated with it tonight so i quit thought i would research it a little more

[Ky 520c]

It's laquer based so laquer thinner is the way to go, I spray a light coat and let it dry a few hours then come back for a heavy coat (not heavy enough to run) and then I'm done