Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Jan 2016
    Location
    Fairfield/California
    Posts
    5

    2006 250xs performance

    New to me..
    2007 Ranger Z21
    Merc 250xs Serial-1E001839
    10” bobs hyd jack
    Tempest 25p

    Running WOT I’m only seeing 5500 rpm and 63 mph trimmed up. PSI drops below 15 as soon as I raise jack plate above 3” with no increase in rpm. Also noticing some hesitation/stutter at WOT. Tried croxton 4 blade 24p with very little improvement. Too much prop? Does this motor require 91 octane? Has the painted block and 87 sticker on cowling. Any ideas?

  2. Member
    Join Date
    Jul 2004
    Location
    Penn PA
    Posts
    15,859
    #2
    If water pressure drops below 15, then you are likely too high.
    Do you have a Sportmaster lower unit?



  3. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    15,375
    #3
    87
    .................................................. ...the scariest thing in life is the unknown ...................................

  4. Member
    Join Date
    Jan 2016
    Location
    Fairfield/California
    Posts
    5
    #4
    Yes, Gen 1 lower.

  5. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    97,865
    #5
    Should be a Gen-1 Torquemaster (1.75R)


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  6. Member
    Join Date
    Jan 2016
    Location
    Fairfield/California
    Posts
    5
    #6
    Quote Originally Posted by EuropeanAM View Post
    Should be a Gen-1 Torquemaster (1.75R)
    Yes it is. Figure I’ll start by replacing fuel lines, filters, and impeller. Motor should turn that 25p tempest to 6000.

  7. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    97,865
    #7
    I would also do the Pulse Fuel Pump. See the FAQ section for this post:

    FUEL LINES AND PERFORMANCE PROBLEMS


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  8. Member
    Join Date
    Jan 2016
    Location
    Fairfield/California
    Posts
    5
    #8
    Thanks Don, I’ll start swapping items out.

  9. Member
    Join Date
    Jan 2016
    Location
    Fairfield/California
    Posts
    5
    #9
    Update.. swapped bulb, gray line from bulb straight to motor, fuel filter, and diaphragm kit. Ran it today 5800 @ 68 mph.. No surging and more torque. Going to get a 24p for summer to gain that extra rpm. Thanks Don and Jesus ����.

  10. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    97,865
    #10
    Good news!


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

Tags for this Thread