Results 1 to 7 of 7

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Dec 2015
    Location
    Cherokee, AL
    Posts
    3

    Ranger Problems... HELP

    I have a '06 Z19 and my touch pad doesnt work it will only let me start the motor no live well pumps or anything the touch pad at the bow doesnt work either and my electronics at the bow doesnt work but the console works fine what could this be i have took the fuse off at the battery and hooked it straight to the barttey any ideas?

  2. Member
    Join Date
    Aug 2015
    Location
    Glenwood, AR
    Posts
    268
    #2
    Check your breaker, I did the same thing two days ago.

  3. Member
    Join Date
    Dec 2015
    Location
    Cherokee, AL
    Posts
    3
    #3
    I did I even hooking the wire straight to the battery

  4. Member
    Join Date
    Sep 2004
    Location
    Murray Kentucky
    Posts
    42,741
    #4
    Quote Originally Posted by reidfishing View Post
    I have a '06 Z19 and my touch pad doesnt work it will only let me start the motor no live well pumps or anything the touch pad at the bow doesnt work either and my electronics at the bow doesnt work but the console works fine what could this be i have took the fuse off at the battery and hooked it straight to the barttey any ideas?
    Take one of wires off ur cranking battery and leave off a couple minutes then try it again, if it still doesn't work u may have a bad pad or Meg a link box.

  5. Member Ranger519VS's Avatar
    Join Date
    Mar 2011
    Location
    Traverse City, Michigan
    Posts
    4,135
    #5
    I had a problem last year with some stuff quit working and it was one of the plugs to the brain box was loose.
    The other single biggest problem with them is low voltage at the battery
    Butch Derickson
    2011 Z521 w/250 hp SHO
    Traverse City, Michigan

  6. Member
    Join Date
    Sep 2004
    Location
    Murray Kentucky
    Posts
    42,741
    #6
    Quote Originally Posted by Ranger519VS View Post
    I had a problem last year with some stuff quit working and it was one of the plugs to the brain box was loose.
    The other single biggest problem with them is low voltage at the battery
    Good advice also

  7. Member
    Join Date
    Aug 2015
    Location
    Kansas OK
    Posts
    149
    #7
    I had the same problem. On my boat the touch pad up front was Burt up had to replace both of them but mine was under warranty