Thread: Prop Suggestion

Results 1 to 11 of 11

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 10-10-2012, 09:33 AM #1
    bdbeau08
    bdbeau08 is offline
    Member
    Join Date
    Oct 2012
    Location
    Marrero, LA
    Posts
    4

    Prop Suggestion

    Currently running a 25P Fury on a 2013 Mercury 250XS. Boat is a 2006 21' Champion Elite 206. Chine walking pretty good at 65mph, while turning 5200rpm's, WOT is yet unknown. Wanting the speed with a little more bite.

    BTW, the 2006 225 Evinrude E-tec take-off is for sale!
    Reply With Quote Reply With Quote
  2. Mark's Props
    Mark's Props is offline
    BBC SPONSOR
    Join Date
    Jun 2004
    Location
    Shelbyville Indiana
    Posts
    14,124
    #2 10-10-2012, 03:02 PM
    What is the motor height?
    Reply With Quote Reply With Quote
  3. bdbeau08
    bdbeau08 is offline
    Member
    Join Date
    Oct 2012
    Location
    Marrero, LA
    Posts
    4
    #3 10-10-2012, 03:13 PM
    Quote Originally Posted by Mark's Props View Post
    What is the motor height?
    Mark's not currently sure, going to make my best attempt to measure it today. Any recommendations?
    Reply With Quote Reply With Quote
  4. Mark's Props
    Mark's Props is offline
    BBC SPONSOR
    Join Date
    Jun 2004
    Location
    Shelbyville Indiana
    Posts
    14,124
    #4 10-10-2012, 03:37 PM
    Reply With Quote Reply With Quote
  5. bdbeau08
    bdbeau08 is offline
    Member
    Join Date
    Oct 2012
    Location
    Marrero, LA
    Posts
    4
    #5 10-11-2012, 09:05 AM
    Quote Originally Posted by Mark's Props View Post
    What is the motor height?
    Prop Shaft is ~ 4" below pad. Also, Fury prop has all three solid (PVS) plugs installed, would this have any impact on my holeshot being terrible as well? I don't believe these plugs have any impact on top-end speed, although I could be wrong.
    Reply With Quote Reply With Quote
  6. 21XDC
    21XDC is offline
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,263
    #6 10-10-2012, 03:42 PM
    Mark is getting good on computers and pics..

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
  7. Mark's Props
    Mark's Props is offline
    BBC SPONSOR
    Join Date
    Jun 2004
    Location
    Shelbyville Indiana
    Posts
    14,124
    #7 10-10-2012, 04:17 PM
    Reply With Quote Reply With Quote
  8. mdtritn21
    mdtritn21 is offline
    Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,600
    #8 10-11-2012, 09:45 AM
    Most people run the fury without any plugs because their hard to turn at takeoff.
    Reply With Quote Reply With Quote
  9. 21XDC
    21XDC is offline
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,263
    #9 10-11-2012, 10:59 AM
    Quote Originally Posted by mdtritn21 View Post
    Most people run the fury without any plugs because their hard to turn at takeoff.
    Thats correct.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
  10. bdbeau08
    bdbeau08 is offline
    Member
    Join Date
    Oct 2012
    Location
    Marrero, LA
    Posts
    4
    #10 10-11-2012, 11:03 AM
    Quote Originally Posted by mdtritn21 View Post
    Most people run the fury without any plugs because their hard to turn at takeoff.
    Thx....Will definitely give this a shot, and install them if ventilating becomes a problem. Anyone with an opinion on the motor height?
    Reply With Quote Reply With Quote
  11. Mark's Props
    Mark's Props is offline
    BBC SPONSOR
    Join Date
    Jun 2004
    Location
    Shelbyville Indiana
    Posts
    14,124
    #11 10-11-2012, 03:45 PM
    To help the chine i would test a 25p tempest plus
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread