Hi Don,
S/N 2B181067
I see a new VV Link software was posted in December, but no reference to what fixes were incorporated.
Do you have any information on what was included?
Been running mine configured for a 200 4 stroke because the 150 4s programming did not allow for H20 pressure to be shown in VV screen, even thought the block water pressure sensor was installed.
Hoping this was fixed.
Hope you are well, thanks for all you provide to us for support.
Happy Boating,
Mike
2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D
There were some changes/additions to the home screen, Updates to engine data/page, and a few other items that aren't likely to apply to your situation.
Report back if you find it corrected the problem you were having.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Will do, just picked boat up from winter storage Friday, hope to get on the water this weekend (although the 20-30MPH forecasted winds may keep that from happening)Originally Posted by EuropeanAM
2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D
Still no coolant pressure if you set it up as a 150 4s or 150 Pro XS 4s, so I'll continue to run it set up as a 200 4s V6, seems to be fine that way.
2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D
Won't hurt anything.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
