Guys,
Just checkin before I start, need to remove the bow panel to access the trolling motor bolts. Only one screw is visible on the panel, is that the only one holding that thing in place? Remove and lift? Thanks in advance......
Brad
Guys,
Just checkin before I start, need to remove the bow panel to access the trolling motor bolts. Only one screw is visible on the panel, is that the only one holding that thing in place? Remove and lift? Thanks in advance......
Brad
Just take the plastic plate the depth finder is mounted to out(should be 4 screws) and you ought to be able to reach the troller nuts. Im refering to a non evo model, evos may be a tad different.
Stroker 21
Mercury 250 PRO XB![]()
TN Bluewater dealer/rep.
BBO
Yep, its a '10 Evo. The fish finder is flush mounted, but no screws holding a plate. I'm pretty sure its just the one screw for the whole panel......
One of the evo guys will be along.The evos have a big plastic shroud and are a tad different. Still should be just a few screws holding it in place.
Stroker 21
Mercury 250 PRO XB![]()
TN Bluewater dealer/rep.
BBO
There are three or four longer screws. You need to first unscrew the panels on each side of the fishfinder mount (starboard side has switches and port side was a blank plate on my boat) - 4 small screws each. There is a larger screw underneath those panels that you need to take out. The whole black plastic shroud can then be moved.