Console graph plate????

[Swerve-n-Protect]

I'm removing my 332c in dash and ram mounting a HM 998 and I need a plate to cover the hole for my 200 XL....anyone got one?? thankS!!

[DB13]

saw someone else on here that took tinted plexi-glass and made his own... looked very sharp and probably much cheaper than purchasing one. i would do something similar if it were my boat.

[Lea]

C&O had some...you might want to check with them...

[Barnboy2]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lea &raquo;</TD></TR><TR><TD CLASS="quote">C&O had some...you might want to check with them...</TD></TR></TABLE>

I thought C & O went out of business?? Did they not?

[Swerve-n-Protect]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lea &raquo;</TD></TR><TR><TD CLASS="quote">C&O had some...you might want to check with them...</TD></TR></TABLE>

That's what I was thinkin, but couldnt find any on their site......may have to call them....No, they didnt close down, that I'm away of.....

[Jim285pro]

C and O will be here until boats are no more.

I made one out of 1/8" black plexiglass and I used RTV to glue it to the dash. I also lightly sanded the glass to give it a dull finish instead of glossy. The picture makes it look dirty but its not its clean and unnoticeable

[Swerve-n-Protect]

Looks nice!! But I better just buy one.....aint very handy with stuff like that...

[Barnboy2]

Just stuff some fat girl panies in the hole swerve and be done with it..

[Swerve-n-Protect]

I'll let ya know how it goes.............