Stratos Livewells and Oxygenators

[Javelin389]

I've been thinking about adding the flush mount Oxygenators to my livewells. Does anybody know how thick the walls are? Or have any advice for installing them? The Oxygenators are only about an inch long, so I'm not sure if they're long enough to go all the way thru the livewell walls without some further "mods".

[EDEERNET]

I just put one in my '05 Stratos 201. I have a fiberglass "divider" between my live wells and the back compartment. I had to really work at it to catch a "thread" on the oxygenator do to the total thickness. Got about an 1/8 turn on it......Hasn't leaked yet. I have to say that I was a bit scared after I drilled a 2" hole and the thing wouldn't fit Worse case scenario....just caulk it in place

[joeschmoe]

I installed them in myu 200 Pro XL and wasn't a problem at all...it took longer to wire everythign up and make it pretty than it did to install them..>Very easy and will work fine in your boat's livewells. Just go SLOW!!

Measure TWICE drill ONCE

[Javelin389]

Thanks guys.

[genemelow]

good to know thanks 8