what size berings?

[JeffA]

i have a 99 stratos single axle trailer with 14" rims, any one know what size wheel bearings and seals i need?
i even called c&o and the girl said "i dont know"..


Modified by JeffA at 1:38 AM 4/11/2009

[JeffA]

nothing?

[All Star Steve]

does it have the sure -lube hubs? I have a '95 and did the bearings myself.

(those are the hubs that have the hole out the back that lets the excess grease out when you lube them)

[JeffA]

i dont think so, they dont have a grease fitting at all.

[Rayzor]

I would imagine that you have a tapered spindle. Back bearing should be a 1 3/8"; that's an L68149 bearing and an L68111 race. The front should be a 1 1/16"; that's an L44649 bearing and an L44610 race. The seal is a little bit harder to pin down because it seems that every manufacturers dimensions are diiferent. I suggest a 2.561 od x 1.719 id x .506 seal.

I hope this helps.

Be safe,
Rayzor

[JeffA]

thanks!

[Bugs]

Jeff, pull the drum off one side and remove seal & bearings. Clean them up real good and there should be a number on them (may need a magnifying glass to see them) that the parts store can match up for you.

Also, try posting in the trailer forum, you'll probably get a better answer

Good luck.