Water Seprator

[Rangerman30]

Does my 99 ZX202 have a water seperator filter? Just bought the boat and getting her ready and need to replace or install before its time for spring.

Thanks Mike

[Rodney Bledsoe]

I'd say no it doesn't. I have a 2002 and it didn't You should put one on.
Here is a picture of my install

[Cclutter1]

Are your fuel lines going to your filter 3/8. I just looked at mine and the gray fuel line going to it looks smaller than the one coming off of it

[Rodney Bledsoe]

My best guess would be yes they are 3/8.

[Cclutter1]

Thanks

[ChrisH]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Rodney Bledsoe &raquo;</td></tr><tr><td class="quote">I'd say no it doesn't. I have a 2002 and it didn't You should put one on.
Here is a picture of my install
</td></tr></table>exactly how i installed mine. replace your fuel lines to the motor and primer bulb for insurance while your doing it. cheap insurance

[Ranger391v]

My '05 didn't either ...... so I mounted mine in the back on one of the metal transom support brackets. And mine are/were 3/8".

Hope this helps.

[fishin couillon]

Were those holes there or you had to drill them out? Thats alot of work with all that stuff in the way...

[Ranger391v]

I drilled them. If memory serves me right, the only thing I had to move/take out was the battery and disconnect a bilge and pumpout hose just to get them out of the way.

It was shortly after that install I 'cleaned up' Skeeter's rigging to make it more like it should have been. As a matter of fact, I put a new filter in her this weekend and I didn't have to disconnect anything to get to it. I think it's the picture angle and those big fuel lines blocking your view that's making it looked more cramped than it really is.

One thing I like about mounting it there ........ using unused space and a rock solid mounting surface.