Easy View In SX180

[jboswell]

I am thinking about installing an easy view (or similar) bag organizer under the deck lids on my SX180. I don't see any support members under the lids, just foam covering the deck.

Has anyone done this on the small skeeters? How did you attach the bars?

[fishin couillon]

I've always wonder the same for my sx 190....could remove.the.foam and.clean the glue where it would mount....i know down here that it wouldn't work with double sided tape due to the heat we have.....

[deadcenter75]

I installed the easyview system in my skeeter zx200.I cut a piece of the foam out the size if the square top mounting bracket,then held the bar up to it and cut a thin piece of foam out the length of the clip rod,then cut a square out for the bottom mounting square.glued the squares down with jb weld instead of the silicone and they have been stuck to the lids with no problem.

[jboswell]

Awesome! That was the idea I was looking for. Any pictures of your setup?

[deadcenter75]

i will try to get you some posted on here in the next couple of days

[deadcenter75]

I will get you some pics up in a day or so.

[jboswell]

Awesome, thanks

[dr. seuss]

[deadcenter75]

sorry for the delay my job dosen't let me get home in daylight hours very often.Here is how i put the easy view tackle system in my ZX200

[reelman]

BPS has a new tough plastic (Black's) bait strip for $9.99 that I found quite useful...
3M strips on for 3 days then add baits...mine has helped clean up a bait mess...